We all know the impact pegs have on BMX bikes and stunt bikes for riders to do tricks and transport cargo or people over short distances. Because of this, you may think about putting pegs on your mountain bike to enhance your mountain biking experience.
In its basic form, a mountain bike is not very conducive to stunts. So, in Therefore, can you put pegs on a mountain bike? Mountain bikes that have long bolt-on axles can accommodate pegs. However, remember you can harm the wheel by doing so.
By design, a mountain bike isn’t made to withstand the pressures of performing stunts carried out by many riders, although they can tackle rough terrain that mountain bikers enjoy.
In our guide, you can learn more about adding pegs to your mountain bike wheel. By the end, you’ll see if it is something you want to add to your mountain bike frame or decide against. (Read Is Schwinn A Good Bike Brand)
What Is A Bike Peg?
One must first debunk some common myths about bike pegs to properly comprehend the understanding. A bike peg is, technically speaking, a small metallic rod fastened to the front or back wheel of the bike.
They mostly help stunt riders develop their capacity to expand additional bike tricks. However, these pegs also help riders in grinding. Once more, the bike pegs can carry luggage or act as a footrest for people. As a result, bike pegs enable more people to ride alongside one another.
Some bike pegs are built for the front wheel, while others are for the back wheel. So the front and back wheels can use some pegs. Pegs usually come in pairs, but some riders buy only one peg for the front or back wheel. However, metal pegs can easily snap, inflicting severe injuries. Therefore, it is risky for a passenger to stand on them.
Can You Add Stunt Pegs To Mountain Bikes?
Standard pegs are made for basic riding and also transportation or carrying luggage. Stunt pegs are mostly used on BMX bikes to help riders show various trick-riding talents. Can stunt pegs be installed on a mountain bike, though?
Putting pegs on mountain bikes is possible, but the results might not be favorable. The frame of a mountain bike isn’t as sturdy as a BMX or single-speed bike, as we first showed.
No matter how strong you think, your mountain bike’s frame is not designed to carry more weight. Although it is possible to put pegs on a mountain bike, doing so is not advised. Mountain bike frames might not bear the strain for passengers or stunts. Let’s examine the drawbacks of installing pegs on your mountain bike.
Why you don’t put pegs on your mountain bike?
1. Loose Installation
There is always a risk that MTB pegs will break or come loose, even if you carefully follow the instructions for installing pegs on your mountain bike. The mechanism of a mountain bike is never suited for mounting pegs; thus, that is why.
Long bolt-on axels are the only reasonable way to put pegs on a mountain bike. Bolt-on axels are not a standard option for mountain bikes these days because they typically come with quick-release skewers or through-axel skewers.
Compared to long bolt-on axels, quick-release or through-axel skewers are shorter. Therefore, the bars cannot take support from them because of their shorter length.
The only way is to pay more money to upgrade your bike to bolt-on axles. The risk of pegs cracking or coming loose still exists despite converting to a long bolt-on axle. However, bolt-on axels significantly lower the risk.
The alternative way of mounting pegs on a mountain bike is to put them on the rack fender eyelets if you don’t want to change your bike’s stock axles. Unfortunately, putting pegs on your bike using this method is extremely dangerous because the fenders can’t bear a lot of tension.
It would be best to swap out the thru-axle or quick-release skewer on your mountain bike for a long bolt-on axle. (Read Mountain Bike Trails In Georgia)
2. You Can Wreck Your Bike’s Frame
The MTB frame’s tubing is longer and slimmer than a BMX bike. Because of this, you could find too much stress on your frame. When you attach pegs on a mountain bike and do your stunts, the pegs turn into levers that put lateral stress on the frame, the fork of the bike, and your front wheel.
The preferred frame materials for most MTB frame designs are aluminum or carbon fiber. These materials cannot handle high lateral stress and may crack, fracture, or, at the absolute least, bend severely. Even if you have a reinforced hub, the rest of your bike could suffer when you install pegs.
If you strike the frame on a hard ledge, the risk of it being destroyed is significantly higher. So, if that’s what you want, stick to BMX bicycles.
3. Flat Tires
You must learn from mistakes of others if you use the pegs for
carrying an extra passenger. The thing is mountain bike tires run on low air pressure. The bike can bear only a certain amount of weight. So, putting pegs on your bike to carry an extra passenger or luggage can leave you open to flat tires.
4. The Whole Wheel Can Snap
When you mount pegs, they are always positioned on wheel axles regardless of the method. With mountain bikes, the derailleur is situated quite close to the axles, and the disc breaks.
The pegs fit in areas where they are vulnerable to bumps and shocks caused by bars passing through axles. Depending on your riding style, the disc brake on your bike could be irreparably damaged by even one forceful impact with a rock.
A harder impact may reach the derailleur, render it unstable, and cause it to be pushed into the spokes of the wheel. The damage when adding pegs goes beyond just the spokes, derailleurs, and discs.
The spokes are so firmly fastened to the rim that they might conduct the impact, causing the rim to bend or snap quickly. While you’re at it, swap out your bike’s hub for one that is stronger.
Impact damage can be reduced and kept from harming the disc brakes and derailleurs with reinforced hubs on a more stable platform.
5. Void Warranties
You must read the terms and conditions of the warranty offer for your MTB for further information. Manufacturers will not honor a bike warranty if unauthorized modifications to the bike cause damage.
Most mountain bike manufacturers disapprove of pegs. Even transporting an additional passenger is sufficient justification for the manufacturer to void your bike’s warranty.
So be aware that if you put pegs on your mountain bike, you may no longer be good to lose the advantage of warranty repairs.
How can You Make Peg Installation On Mountain Bike?
Mountain bikes are not the best for stunt riding, but there are specific reasons why putting pegs to MBTs would make them less dangerous.
1. Steel Frames
Compared to carbon and aluminum, steel can tolerate more damage. Such is the rationale for using Chromoly in expensive BMX bike frames. Make sure your mountain bike has a steel frame if you wish to ride it.
2. Long Bolt-On Axles
Most mountain bikes, as was already said, use quick-release skewers. However, switching to longer and stronger bolt-on axles would be strong if you wanted to put pegs on your mountain bike.
Notably, for installing pegs, you can choose 14mm BMX axles, which are the same thickness as that found on mountain bikes and bolt-on axles to your frame.
3. Covert To Single Speed
By default, most bikes have many gears. Unfortunately, the rear derailleur is a weakness for stunt riding. If you’ve been paying attention, you’ve probably noticed that single-speed bikes make up most of the trick bikes.
Remove the derailleur in favor of a single-speed freewheel to fix this problem.
4. Rigid Steel Fork
Most suspension forks are aluminum and weren’t made to resist the lateral stress that pegs produce.
Therefore, relying on a rigid Chromoly fork would be preferable if you use pegs on an MTB. Alternatively, you might forego adding front pegs on a mountain bike altogether.
5. High Bottom Bracket
The cranks may be prevented from grinding themselves if the bottom bracket of the bike is set too low. So, to make this work, you need a high-bottom bracket.
Can You Put Pegs On Quick Release Levers?
Bike pegs are typically installed on the axles by default. The quick-release skewers, however, are too short for the pegs. Therefore, you cannot tighten the skewers while the pegs are in place.
As a result, a mountain bike with quick-release levers cannot have pegs. Additionally, certain skewers’ plastic ends make them unsuitable for peg installation.
Actually, use bolts and a reinforced hub that can accept the pegs if you wish to install pegs on a mountain bike. (Find the Best Bike Rack For A Hatchback)
What Kind Of Bikes Can You Put Pegs On?
Your riding experience can be significantly enhanced by having pegs on your bike. Unfortunately, not all bikes can have pegs installed. So what types of bikes can you put pegs on, then?
1. BMX Pegs
The BMX bikes used primarily for stunts and stunt riding are most suitable to install pegs on.
The BMX bikes are single-speed bikes, which is another benefit. Fortunately, pegs are typically pre-installed in BMXX bikes.
If your bike doesn’t already have stunt pegs, you can purchase some good ones, such as:
- Amotor Aluminum Alloy anti-skid bike pegs
- Amotor bike pegs
- Zelerdo Aluminum Alloy bike pegs for MTB
2. Road Bike
The road bike is the other bike that you might equip with pegs. However, top-tier road bikes employ quick-release levers. However, you can get steel bikes with long axles and lug nuts at the lower end of the market.
Track bikes, universal bikes, and MTBs are additional types of bikes that can have pegs attached.